Description
Features:
A New High-Quality 4 Line 20 Character Lcd Module
Not Only Set The Contrast Control Knob Selector Switch
Also Has A Backlight And Iic Communication Interface.
For Arduino beginners, not for the cumbersome and complex LCD driver circuit connection and a headache, the real significance of this LCD module will simplify the circuit, this module directly into the for Arduino Sensor Shield V5.0 sensor expansion board IIC device interface can, G M 4P sensor connection cable, programmed through the for Arduino controller, you can easily identify the slogan, sensor data records
Specification:
Interface: I2C
I2C Address: 0x27
Pin Definition : GND VCC SDA SCL
Back lit (Blue with White char color)
Supply voltage: 5V
Size : 60mm×99mm
Contrast Adjust : Potentiometer
Backlight Adjust : Jumper
For Arduino Test Code:
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x27,16,2); //set the LCD address to 0x27 for a 16 chars and 2 line display
void setup()
{
lcd.init();
lcd.backlight();
lcd.setCursor(0, 0);
lcd.print("b2cqshop");
lcd.setCursor(0, 1);
lcd.print("Voltage: ");
lcd.setCursor(13, 1);
lcd.print("V");
}
void loop()
{
int val;
float temp;
val=analogRead(0);
temp=val/4.092;
val=(int)temp;//
lcd.setCursor(9, 1);
lcd.print(0x30+val/100,BYTE);
lcd.print(0x30+(val%100)/10,BYTE);
lcd.print('.');
lcd.print(0x30+val%10,BYTE);
delay(100);
}
Package Included:
1xLCD Display Module
Specification
Brand Name : jupoco source