Description
Application range:
This product is typically applied to the multi-channel electric doors and windows, ordinary electronic lock, switch, electric garage door, window, hoisting equipment ,industrial automation and control, all kinds of anti-theft alarm ,security and other fields .The remote controller supports the use of forming a complete set of wireless intelligent remote control system .It has a wide range of uses.
Second, learning, clearing methods and steps
1. Key function:
The two buttons on the controller are LEARNING and mode switching buttons (MODEL) respectively.
2. Learning methods:
Press the learning button once, the indicator light flashes (into the learning state), press any key on the remote control, the indicator light flashes three times, indicating that the first relay is learning successfully; press the learning key twice, repeat the above steps to learn the second relay;
3. Switching the working mode: (All relays are off, you can turn off the power and re-power on during the operation)
Jog: Press the mode switch button, the indicator light flashes once and then goes out, indicating that the jog setting is successful.
Interlock: Press the button to switch between the two modes; the indicator light flashes twice and then goes out, indicating that the interlock setting is successful.
Self-locking: Press the button in the three-time mode to switch; the indicator light flashes three times and then goes out, indicating that the self-locking setting is successful.
Delay 5 seconds: Press the button in the four-time mode switch; the indicator light flashes four times and then goes out, indicating that the delay setting is successful.
4. Clear code: Press and hold the learning button until the indicator light is on.
Third, the main technical parameters
1, the working voltage: AC/DC12-50V
2, quiescent current: 10mA
3, the working current: 30mA-90mA
3, working temperature: -20 °C -80 °C
4, receiving sensitivity: -103dBm
5, working frequency: 315/433 frequency
6, the load range: less than 10A
7, the output mode: switch signal contact output
8, size: 68mm*48mm*20mm
Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency
3.Package Included:
A: 1 x Receiver(with cover)
1 x Transmitter(with battery)
B: 1 x Receiver(with cover)
2 x Transmitter(with battery)
C: 1 x Receiver(with cover)
