3A 5V-15V DC Motor Speed Control PWM Potentiometer Governor Regulation Board LED Dimming Ultra High Linearity Band Switch Module

Parameter:

Maximum voltage: 15V

Minimum voltage: 5V

Current: 3A

The maximum current can reach continuously: 10A

Short circuit maximum current: 20A (less than 10 seconds)

Speed control mode: PWM stepless speed regulation, can also be used to adjust the light

Control mode: speed control potentiometer (open clockwise, continue to rotate clockwise from 1% to 99% speed)

Duty cycle: 0%-99% (0% position is the leftmost closed state of the potentiometer).

When the current is turned on, 0.002A (there will be no current if the governor does not need to be turned off for a long time).

Efficiency: The highest efficiency is up to 98%.

Volume: 3cm long (without potentiometer), 2cm wide, 1.4cm high

Weight: 10 grams

Customized service:

If you are using speed control (dimming) to make products, the store can provide customization services for free, which can modify the shape of the circuit board, installation mode, current and voltage parameters, add other functions, etc. according to the customer's requirements.

Notice:

The governor is mainly used for motor speed control. If you are accustomed to LED dimming, you must ensure that the LED can also work with direct power supply. The dimming range of the governor is from the direct connection of the LED to the dimming range of the LED. The power supply is dimming. If the LED is directly connected to a power supply, it will be burned through the dimmer, and the dimming will be burned out. This usually requires a current limiting resistor in series. If you don’t know how many resistors there are, you can contact customer service.

Package Included:

1 PWM speed control LED dimming 3A/5V-15V ultra-high linear band switch