Friendly Reminder:
What is wifi breaker?
It is a switch that can be connected to the Internet through WIFI and can be turned on and off remotely through the mobile phone.
About the buttom
Share with your family
Step 1: Configure device networking
When the device is powered on, open a hotspot of Homekit-sensor_xxxx and connect the hotspot of "Homekit-sensor_xxxx" with the password of "12345678", and wait about 3 seconds. The mobile phone will automatically jump to the distribution network interface.
Note: If there are multiple devices, please pay attention to distinguishing different hotspot names.
If the mobile phone does not automatically jump to the distribution network interface, please open the mobile browser input: htt://192.168.4.1, waiting to enter the distribution network interface. Please select your family WiFi name in the jump page, and enter your password in the password, and click join.
Step 2: Check whether you install Home APP.
HomeKit For Android:
Note: If there is no refresh to the device, please make sure that the mobile phone and smart socket are in the same LAN. Please make sure that the light is always on. If the addition fails, please check the FAQ.
Q: What should we pay attention to in the process of distribution network?
1. Make sure that equipment, mobile phone and router are close to each other in the process of distribution network.
2. Make sure the password of the router is correct in the process of distribution network.
3. Make sure that the router works in 2.4 G band and enables broadcasting, and works in non-11 n only mode.
4. In the process of network distribution, please ensure that the router wireless encryption mode is wpa2-psk type, the authentication type is AES, or both are set to automatic.
5. If the router opens wireless MAC address filtering in the process of distribution network, please remove the device from the router's MAC filter list; make sure that the router has firewall function. If yes, please turn off the firewall function and then try to connect the device to the router.
6. If it is a dual-band router, please set different passwords for 2.4G signal and 5G signal, or turn off 5G signal. Do not turn on the dual-band function.
Q: If I have already configured it, what should I do if I want to reconfigure it?
If the routing has been configured before, if you want to reconfigure the new router, switch on and off more than five times continuously, each time the power-on time is more than 2S, less than 10s, and then repeat the first step of distribution network.
Support:
Material : Plastic
Origin : Mainland China
Technical parameters : Value 2
Tool Supplies : Battery
Brand Name : SZDoit
Upgrade Parts/Accessories : Base C
Quantity : 1 pcs
Use : Vehicles & Remote Control Toys
Size : Other
RC Parts & Accs : Antennas
Four-wheel Drive Attributes : Assemblage
Remote Control Peripherals/Devices : Remote Controller
Model Number : Other