High Voltage Boost Module Board DC Power Glow Tube Clock for Nixie Tubes Support Lithium Battery 5V-9V to 160V 170V

5V-9V rise 170V small boost module, glow tube boost module.

The Japanese TTRN-060S transformer is used to ensure sufficient power. The large-capacity filter capacitor is used to ensure that the output ripple is small and it is not easy to interfere with other peripheral circuits.

5V input can drive eight IN-14, IN-12 glow tubes, but because the working current is large, the voltage drop caused by the line is also large, please ensure that the input voltage at the module end is not lower than 4.3V, otherwise the output voltage will be significantly insufficient . Due to the large input current, please arrange it as close as possible to the power input port. Please use a thick wire to directly connect the power interface and the module input end. Do not use a DuPont cable or a breadboard.

The 3.7V lithium battery input can drive a maximum of six IN-14 and IN-12 glow tubes, but the efficiency is low. It is recommended to drive four glow tubes.

The maximum output current is 20mA, which can drive eight IN-18 large glow tubes, but the heat is very large. It is recommended that the long-term working current is not higher than 18mA. It is recommended to buy a 12V boost module in the store if high current is needed.

Size: 19mm * 16mm * 8mm (160V version 7mm thickness)